3-year warranty
Easy-to-use, in-line remote
Highly water-resistant

The Easy Plant LED Light was designed to be easy, while also being affordable and long-lasting. This was no easy task as we had to evaluate every feature to make sure it justified its cost.

We started by giving it a 3-year warranty. This meant every feature afterwards had to lend itself to longevity. We made it HIGHLY water-resistant. One of the main ways lights go bad is from water, whether it's from being knocked in or it's getting sprayed with water from an air stone. Plus, our light has the ETL certification, which covers the UL listing, CSA listing, and several other North American safety standards. Note: the controller and power plug are not water-resistant and should not be submerged underwater.

How powerful is it? We wanted a light that was bright, grew plants, and made fish look great. However, it needed to work on aquariums of any size. So we made it adjustable. You can dim the light down. At its brightest, it has the most light output of any light we've ever sold. However, you can adjust the intensity to 10 different levels to get the perfect brightness for your aquarium.

With it being so bright, does it get hot? It does get warm, but we paired efficient LEDs with an efficient ballast. We also redesigned the housing to be more robust and dissipate heat better. You'll see competing lights that are 10% to 50% less efficient. This adds up to more heat and more money spent to get the light your plants need.

Next up was making it easy to use. Therefore, we purposely made a simple, in-line remote with limited options. It has a mode button that cycles between on, off, and night time mode. Then, there are two buttons for up and down to adjust how bright the light is. The light has 10 brightness settings — from 10% to 100% brightness — and the display on the controller shows the current light intensity. (Yes, it saves its settings in a power outage or when using a timer.) This means you can share your settings with others easily. "My 20-gallon tank uses the Easy Plant LED at level at 60% and I've been growing these plants."

Does it have sunrise/sunset mode? Can I change the individual LEDs? These features didn't make the cut. The price increase and loss in efficiency in the LEDs didn't make sense when achieving our goals of the best possible light that lasts a long time while remaining affordable.

We recommend using this light with a Kasa Wifi Timer set to 8-12 hours per day.

Time to plug it in? Don't worry — it has a super long, 12-foot cord (with 3 feet between the light and the remote). Don't you hate it when a light has a clunky ballast that has to hang off the back of your tank, causing your light to move or becoming disconnected? Not a problem here since we put the ballast at the plug.

We recommend using this light paired with Easy Green and Easy Root Tabs for the ultimate Easy Planted Aquarium.

Not Sure Which Light Size to Get? View the LED Light Guide.

Easy Plant LED chart

What is the PAR Rating for the Easy Plant LED?
PAR measures the brightness of a light used for growing plants. As a general rule of thumb, low light plants want 10-20 PAR, medium light plants want 20-35 PAR, and high light plants want 40-50 PAR or more. This chart shows the PAR values of the Easy Plant LED at 100% brightness when measured at different tank depths. With the light's dimmable brightness feature, you can easily lower or raise the PAR level to meet your aquarium plants' needs.

PAR values for Aquarium Co-Op Easy Plant LED planted tank light

Type

Collection

Sort By