Load image into Gallery viewer, Eva Filtration Pre Filter Sponge

Pre Filter Sponge

Regular price: $3.99
Sale price: $3.99
Regular price
Unit price: per

Quantity:

Quantity must be 1 or more

Prevents small animals and debris from getting sucked up
Increases filter capacity
Uses coarse foam to extend time between cleaning

The pre-filter or intake sponge is a simple foam cylinder that is designed to slip over the intake tube of hang-on-back (HOB) and canister filters. The filter intake tube often has large openings, so use a pre filter sponge to prevent fish, shrimp, and sizable debris from getting sucked up and ruining the filter motor. Not only does an intake sponge clear up your water, but it also provides valuable surface area to grow beneficial bacteria.

Find out which sponge size to get and how to properly fit it to your hang-on-back or canister filter intake by viewing the Sizing Chart and Video below. (Click the "Show More" button to expand the Directions/Specifications section.)

Increased Filter Efficiency

Increase the capacity of your filtration. A pre filter sponge provides valuable surface area to grow beneficial bacteria, which purify waste chemicals in the water and make it safe for your fish to live in. It also adds mechanical filtration that keeps bulk debris from clogging your finer filter pads and extends the life and efficiency of your filter media.

Prevent Fish, Snails, and Food From Being Sucked Up

The filter intake tube often has large openings that allow sizable objects to get sucked up by the filter, potentially ruining the motor, so use a pre-filter sponge to help prevent baby fish, long-finned fish, dwarf shrimp, snails, plant leaves, fish food, and other debris from entering the filter.

Easy To Clean and Reusable

Put a ziploc bag around your pre filter sponge when you remove it from the aquarium. Squeeze it until the water turns brown. Dump the dirty water on your favorite houseplant. Then get another bag of water and repeat until clean. Afterwards, place it back on your filter's intake. This reusable, re-washable prefilter will last you many years.

Proper Fitment

In general, a larger pre-filter sponge is always better because it gives you more time between cleanings and increases your filtration capacity. Use a zip tie or O-ring on the filter intake tube when you need a snug friction fit to keep the sponge from falling off, as shown in the picture. A rubber o-ring can be found at hardware stores or Amazon.

small_4_panel_filter_intakes_update_fluval

Fits Most Filters

Most hang-on-back and canister filters can be fitted with a pre filter sponge. With some filters like the Fluval 409 series, it slides right over the intake and is a direct fit. With other filters like the Fluval FX series, you must remove the intake screen or basket and use an o-ring or zip tie. See the Sizing Chart in this page's Directions/Specifications section to pick the right pre-filter sponge for your filter.

Great upgrade with American co-op pre filter

Upgrade of intake performance an aquarium ascetics for FX6 intake which will remove more particles and provide cleaner flow going into the filter.

great sponge

works as intended

Great little sponge

I was having an issue with duckweed clogging the siphon vents on my filter and I used this sponge to encase and protect it. This has out worked great. In addition it has become a great substrate for things to grow on and my shrimp love it.

Great quality

Very happy with this product. I bought 2 mediums so I could have the option to swap them out for a deep cleaning. I have a Fluval AC50 and fits perfect. It is bigger and coarser than the one that came with the filter. Great upgrade and very appreciative of the chart to help choose what size to buy.

Little small for a fluval 207 in my opinion

I bought the one recommended for the fluval 207 and it requires a bit of tearing of the innermost part of the foam to get it over the intake screen. It fits and it probably won't fall off but it was really hard to get on under water.

Pre Filter Sponge

Pre Filter

Perfect for my inlet tube.

Fantastic customer service

I had initially placed an order for food and the liquid fertilizer, completely forgetting to add this sponge. I emailed them about 10 minutes after I placed the order, and they were thankfully willing to add it to my current order so I didn't have to pay an extra shipping fee. They were also very kind in helping me confirm that the medium sponge would fit the intake of my Aquaclear 50 (even though they would have been very justified in being sassy over me not noticing the giant chart in the item description that answers my question...)

As for the sponge itself, it fits perfectly and does it's job. It's bigger than I expected and I had to adjust my driftwood a bit to get the intake to fit behind it, so if you're about to order one of these pay more attention to the measurements than I did to make sure it's right for you. But even with its size I'm happy I got it (:

Good but

i originally bought the small but the hole was so small i had to cut it and then in last order i moved up to medium for a hang on the back filter from Petsmart and i had to cut the hole in the middle way more to fit on petsmarts small hang on the back. Its works fine , but be it known adjustments have to be made.

Great for my new canister - fits over original intake and pipe

The large filter fits over the intake that contains a plastic ball to prevent backflow into the aquarium.

Pre Filter Sponge

Increased Filter Efficiency

Prevent Fish, Snails, and Food From Being Sucked Up

Easy To Clean and Reusable

Proper Fitment

Fits Most Filters

Customer Reviews