Search Results

  1. What are Indian almond leaves used for? When you drop a dried catappa leaf into your aquarium water, the leaf begins to slowly decompose and produce tannins, which are plant-based compounds that gradually lower the pH and stain the water with a yellow-brown tint. Benefits include: Lower pH and softer water for keeping and breeding lower pH species Antibacterial and antifungal properties for healing mild ailments Food for baby fish and shrimp Tinted water for creating a blackwater aquarium or biotope For more details on whether or...
  2. What are power heads? For larger aquariums or fish tanks that need faster flow, a power head is great option because of its versatility in multiple applications. A powerhead is simply a submersible water pump that sucks in water from the input and sprays out a powerful stream of water from the output. This device can be used to speed up water changes, create your own DIY filtration, and of course boost water circulation in your aquarium. For more information, read our full article on water circulation.
  3. Should I boil Indian almond leaves? We do not boil them because it releases all the tannins and then you don’t get their benefits. However, if you don’t like the way the leaves look, some people like to make a catappa leaf extract by boiling one leaf for every 0.5 gallon (2 liters) of water. (Make sure to use a cheap pot you don’t care about because it may become stained.) Once the liquid has cooled, pour a little into the tank until you reach the color you want. If you add too much extract, just do a water change to dilute the...
  4. How do I use Indian almond leaves? If the dried leaves are very dusty or dirty, you can gently rinse them in water first, but the catappa leaves sold by Aquarium Co-Op are clean enough that we just drop them directly into the fish tank. They usually float for the first 3-7 days, so if it bothers you, weigh them down with a rock or decoration. Also, you can break the leaf in half to just use part of it or crumble it into smaller pieces to speed up the decomposition process. For more details on the benefits of catappa leaves, re...
  5. How many catappa leaves should I use? Start with 1 leaf (approximately 4-7 inches or 10-18 cm long) for every 5-20 gallons of water. If you are making a blackwater tank, use more leaves and soft woods (like Malaysian driftwood and cholla wood) until you achieve the desired color. For more details on the benefits of catappa leaves, read our full article.
  6. What’s the difference between a powerhead and a wave maker? A fish tank powerhead typically shoots a narrow jet of water in one direction, whereas a wave maker is meant to imitate the back-and-forth motion of ocean waves. For more information, read our full article on water circulation.
  7. What order should I put the aquarium filter media? There are many ways to layer the filter media in your filter, so these are our general suggestions. The first step is to look in the manual and find out which direction the water flows through the filter. As the water enters the filter media basket, we like to use a coarse sponge pad as mechanical filtration to block the largest chunks of debris and prevent them from entering the rest of the filter media. If you need to use the ammonia or phosphate media pads, you can place them here since th...
  8. How long does aquarium filter media last? Reusable filter media – such as the coarse sponge pad, bio rings, and Purigen – can last for many years, as long as it can be cleaned sufficiently so that its functionality is not impaired. Fine poly pads should be disposed when they turn brown in color and water cannot move through them as easily. A general rule of thumb is to change chemical filtration (like activated carbon, ammonia media pads, and phosphate pads) once a month, but the only surefire way to tell if they are spent is to meas...
  9. How do I clean an aquarium filter without killing bacteria? Remove the filter media and rinse them in old aquarium water or dechlorinated water to remove any accumulated waste. Coarse sponge pads are the dirtiest and can be vigorously wrung to clean it as much as possible. Bio media houses beneficial bacteria and should be gently agitated (not scrubbed) in the water. Chemical filtration needs to be replaced entirely when used up (unless you’re using Purigen, which can be cleaned with diluted bleach). The frequency of filter maintenance depends on many...
  10. Can a power head be used as a filter? Yes, power heads can be used as part of your filtration system. Many people use them to transfer water from their aquarium sump filter (which is a type of custom filtration) back into the fish tank. We also designed our powerhead pump to fit perfectly with the Aquarium Co-Op sponge filters. Normally, an air pump is used to run a sponge filter and gently draw water through the foam material. By attaching a power head to the sponge filter instead, water is pulled through the foam at higher spee...
  11. How big of a power head do I need? Some websites say that water should circulate around a tank at least four times an hour, so if you have a 100-gallon tank, then you need a filter and/or powerhead that can move 400 gallons per hour (GPH). In our experience, the ideal flow rate depends on the plants and animals in your aquarium because some species can’t handle strong current and may become sick from all the stress. If you see that your fish and foliage are being whipped around the tank, choose a less powerful filter or power ...
  12. Do I need carbon in my aquarium filter? Because activated carbon (and most chemical filtration) is disposable and cannot be reused, we like to save it for specific instances when we know there are pollutants or tannins that we wish to remove. If you are preparing for an aquarium photoshoot, you may choose to use carbon to ensure the water is extremely clear. However, most hobbyists do not use carbon on a daily basis because it gets depleted so quickly and the results may be temporary. For more information on filter media, read the ...
  13. How many watts does a powerhead use? Each model is different, but the Aquarium Co-Op power head uses 10 W of power to produce 211 GPH or 800 liters per hour (LPH). For more information, read our full article on water circulation.
  14. What is hydra and how do I get rid of it? These tiny, freshwater organisms of the genus Hydra are the distant relatives of jellyfish, corals, and sea anemones. Growing up to 0.4 inches (1 cm), they range in color from translucent white to green to light brown. Much like a sea anemone, hydra has a stalk or foot that attaches to surfaces (like plants, hardscape, or glass) and a mouth at the other end that is surrounded by long, wispy tentacles. These tentacles have stinging cells that are used to paralyze and catch their prey. Scientis...
  15. What eats pest snails in aquarium? Pest snails are actually in high demand if you own a snail-eating fish because they provide a lot of essential nutrients and enrichment for the animal to display its natural hunting behavior. Almost all freshwater pufferfish – from the tiny pea puffer to the massive Mbu puffer – love to eat snails, and the crunchiness of the snail shells can help grind down puffer teeth and prevent them from getting too long. Many loaches – such as clown, zebra, yoyo, and dwarf chain loaches – can use their p...
  16. How do I get rid of algae in my fish tank? Algae is a natural part of the aquarium ecosystem because it helps to purify the water from toxic waste chemicals and serves as a food source for algae-eating fish and invertebrates. However, most people see it as an unwelcome guest since too much algae can obstruct your view of the fish tank and slow down healthy plant growth. Let’s talk about 5 easy methods for cleaning algae off your aquarium walls and decorations. Use tools to manually remove algae Get help from algae eaters Remove exces...